Ethereum: BFGminer Cannot Find NanoFury on Windows System

As an enthusiastic Ethereum miner, I recently purchased a Nanofury ASIC unit with the great hope of maximizing my mining profits. After some trial and error, I found myself stuck trying to get the machine to recognize my NanoFury ASIC unit in the Bitcoin Fog software (BFGminer). In this article, I will walk you through my experience and provide some troubleshooting tips to help you overcome similar issues.

The Setup

I set up my system with a fresh install of Ubuntu 20.04 on my Windows 10 PC. I installed BFGminer from the official GitHub repository, followed by the NanoFury firmware for my ASIC unit. I also made sure that the necessary drivers were installed and configured correctly.

Initial Issues

After running BFGminer on my system with the NanoFury ASIC connected, I encountered several issues:

• No Output: Despite the hardware being recognized by the software, no mining activity was reported.

• Mining Speed ​​Not Increasing: The hash rate (in H/s) remained the same as when using another mining rig.

Troubleshooting Steps

To get my NanoFury ASIC working with BFGminer, I followed these steps:

• Update Drivers

  

  : Make sure to update the GPU drivers for your NVIDIA graphics card, which is paired with the NanoFury ASIC.

• Reboot System: A simple reboot can often resolve issues related to driver conflicts or incorrect settings in BFGminer.

• Check BFGminer Configuration Files: Examine the “bfgminer.conf” file and make sure that the hardware detection options are configured correctly.

Additional Tips

If you are experiencing similar issues, here are some additional tips:

• Check Firmware Version: Make sure that your NanoFury ASIC unit’s firmware is up to date by visiting the manufacturer’s website.

• Check System Compatibility: Make sure that your system meets the minimum requirements for both the BFGminer and NanoFury ASIC units.

• Disable Any Antivirus Software: Temporarily disable any antivirus software to rule out conflicts.

Conclusion

While my experience has not been without its challenges, I am confident that with patience and persistence, you will be able to get your Nanofury ASIC unit recognized by BFGminer on your Windows system. If you encounter any persistent issues or have any other questions, feel free to ask them in the comments below!

I hope this article has been helpful to other miners who may be facing similar issues. Remember to stay up to date with the latest developments and firmware updates to ensure optimal performance. Happy mining!